STAINLESS STEEL AIR SHOWER
Air Shower is designed to supply Class 100 HEPA filtered air at high velocity it helps remove particulate matter from the personnel entering into the clean room.Air shower works as partial clean equipment installed at the partition between the clean room and non- clean rooms to shower the personnel or matters before entering the clean area.This units helps to remove dust effectively and maintains the normal working sttitus. Air Shower is available I various standard dimensions also our cabinet can be custom engineered to fit any size. These units are available in powder coated Mild Steel / SS304 or combination of both.
Description
Description – AIR SHOWER (MOC SS 304, 316,316L & GI Powder Coated )
HEPA Filter | Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% for 0.3 micron |
---|---|
Pre-filter | Pre-filters are made from Non-woven synthetic with HDPE mesh; conforms to EU-06 Grade, with an efficiency rating better than 95% down to 5 micron |
Fresh Air Filter | Fresh Air filters are made from Non-Woven Synthetic with HDPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10 micron |
Motor blower assembly | Motor blower designed of statically” and dynamically balanced for supply of sufficient capacity and static pressure to take care of air flow requirement for entire life of HEPA. |
Pressure Gauge | Magnehelic Gauge (0-100 mm: 1 Nos. )to monitor pressure drop across HEPA Filter. |
Lighting | Fluorescent Light (250Lux )at work surface |
ON/OFF Switches | Keypad ON/OFF Switches for Door Entry & Exit |
Control System | Interlocking system to ensure that both the doors can not open at the same time & to ensure that both the doors stay locked during the time of air flow. |
Time setting for Air shower | Time setting for air shower operation time (set table for 30 seconds to 5 minutes) |
Emergency Operation | Emergency Stop will be provided |
Door Opening | Straight entry Straight exit and 90 degree door opening |
Operation Mode | Automatic as well as manual mode |
DOP Port | DOP test port at upstream of HEPA filter integrity test. (With PAO Solution) |
Door | SS 304 doors Puffing with double walled flush Toughened glass view panels and door closer |
Electric Supply | 230V AC 1-Ø 50HZ/ 415V AC 3- Ø 50HZ |
Noise Level | Less than 67 dB on Scale ‘A’ when Ambient is not greater than 55 dB on Scale ‘A’ |
Vibration Level | Minimum |
Optional Accessories
1) Audio Visual Alarm indicating condition of HEPA filters
2) Clean down timer with operation hold indicator
3) VFD based control systems
4) Photohelic guage / Digital pressure gauge to monitor of pressured rop across filter.
5) Flame proof fitting
Reviews
There are no reviews yet.